CPFlight - SIDE board with CP and FO Warnings View larger

CPFlight - SIDE board with CP and FO Warnings

Plus Shipping

SIDE737 is a Plug & play module that allow you to connect the glareshield wanrnigs to your MCP ( both MCP version ) using the daisy chain connection through a 5 pole cable.

Note: SIDE737 is an expansion modules and require MCP737PRO or MCP737EL to operate.

By buying this product you can collect up to 49 points. Your cart will total 49 points that can be converted into a voucher of $ 5.27.


$ 536.52

  • SIDE board with CP and FO Warnings
  • SIDE board ( without warnings )

SIDE737 is a Plug & play module that allow you to connect the glareshield wanrnigs to your MCP ( both MCP version ) using the daisy chain connection through a 5 pole cable. The SIDE737FULL package include the FIRE WARNING and MASTER CAUTION annunciator/switches besides the SIXPACK for both Captain and F/O sides. They come simply connected to the SIDE737 module through the provided flat cable set. 

NOTE: the FIRE WARNING / MASTER CAUTION Switch group need to be disassembled to allow inserting in the Glare wing. The legend/diffuser group need to be separated from the switch. To do this push the two lock buttons and pull-out the front group body as indicated in the following figures. After the legend/diffuser group assembling on the Glare-wing reinsert the switch body group from the back. Pay attention on the correct positioning (FIRE WARNING outboard and MASTER CAUTION inboard) and on the correct switch body position when inserting. Note that the Captain side and F/O side switch set are different. Hole distance between FIRE WARNING and MASTER CAUTION switch is 26,25mm; hole diameter is 15mm.

Many simmers already have Flyengravity Sixpack’s & Warning annunciator/switches, in this case the sole SIDE737 module can be purchased, the flat cables are provided too.

Flyengravity Warnings annunciator/switches: 
For a clean wiring, two small PCB are provided to be welded to the Warnings annunciator/switches pins

Flyengravity Sixpack: 
It can be directly connected by the flat cables, ensue the following color guide for correct connection:
Depending by the version, the Flyengravity sixpack module can be internally connected in Common Anode or Common Cathode configuration. Set the SIDE737 module “KC/AC” jumper according to the sixpack module version. 
For this reason both sixpack modules (Captain and F/O) must be of the same type. 

Ex1: Common anode 
set the jumper in AC position for common anode led configuration 

Ex2:Common Cathode 
set the jumper in KC position for common cathode led configuration
Experienced cockpit builders that need to achieve their own sixpack and warnings for this reason we provide the SIDE737 also without the warnings. 
Following you can find the module pin-out:
WARNING! warranty expires if the SIDE737 module is used with different products/configuration from those reported on this manual.

Reviews Reviews (0)

Total rating:
0 1 2 3 4
0/5
Based on 0 reviews
Filter:
0 1 2 3 4 (0)
0 1 2 3 0 (0)
0 1 2 0 1 (0)
0 1 0 1 2 (0)
0 0 1 2 3 (0)